Uline H-4888 Instrucciones De Montaje página 2

NOTE: Do NOT fully tighten bolts until the last step.
1. Attach upper beam to back left and back right post
using bolts, nuts and washers. (See Figure 1)
Figure 1
Upper Beam
Nut
Washer
Bolt
Back Left
2. Attach front left and front right posts to back left and
back right posts using bolts, nuts and washers.
(See Figures 2-3)
Figure 2
Top Left Vew
Front
Back Left
Left Post
Post
3. Attach top shelf to all four posts using bolts, nuts and
washers. Then attach middle shelf, followed by the
bottom shelf. (See Figure 4-6)
Figure 4
Figure 6
PAGE 2 OF 9
Back Right
Post Post
Figure 3
Figure 5
ASSEMBLY
4. Stand unit up and attach posts to base using bolts,
nuts and washers. (See Figure 7)
NOTE: Back posts attach to outside of base.
Front posts attach to inside of base.
Figure 7
Base
5. Attach cross braces to top and bottom shelf using
bolts, nuts and washers. (See Figure 8)
NOTE: You will need to remove the bolts, nuts
and washers that are already in the shelves
and then reattach.
Figure 8
6. Tighten all nuts and bolts. Attach the safety chain.
(See Figure 9)
Figure 9
Back
Post
Front
Post
0321 IH-4888