Multi-Angle Footrest - Ki Mobility Little Wave Arc Manual De Instrucciones Y Garantía

IV. WHEELCHAIR USE & CONFIGURATION
S. Multi-Angle Footrest
1. Changing Footrest Angle (Fig. 25)
The Multi-Angle Footrest utilizes a ball joint which allows the footrest to be set in a variety of
angles just by applying pressure to different areas on the top of the footplate.
Fig. 25
Ball Shaft - Up Position
2. Changing Footrest Height
a. Remove footplate assembly from hanger by removing screw (Fig. 26:G), washer (Fig. 26:F),
washer (Fig. 26:E), saddle spacer (Fig. 26:D), washer (Fig. 26:C), washer (Fig. 26:B) and nut
(Fig. 26:A) using a 5mm Allen wrench and a 10mm wrench.
b. Slide the footplate assembly to desired height and reinstall hardware in nearest hole.
A
Ball Joint
B
C
E
Ball Shaft - Down Position
D
35
Fig. 26
F
G
Ball Joint