Operating Instructions - Biochef Apollo Manual Y Recetas

Operating Instructions

EN
STAND BY MODE
Plug in the blender and turn the power on at the ON / OFF button at the base
of the blender motor.
• The indicator lights AUTO, SMOOTHIE and VACUUM will light up.
• The light on the START / STOP will also light up.
: If the blender is not operated for three minutes in STAND BY mode, all
NOTE
indicator lights will go out and the blender will go into SLEEPING MODE. To
wake the blender from SLEEPING MODE do any of the following:
1. Press START / STOP dial
2. Rotate the dial to OFF position
3. Open and then close the noise Reduction Cover
PULSE
Turn the dial anti-clockwise to use in pulse mode.
VARIABLE SPEED
Turn the dial to clockwise for variable speed.
AUTO BUTTON
AUTO mode is perfect for thicker ingredients as the blending time is slightly
longer than SMOOTHIE mode. Try either mode to see what works best for
your ingredients.
While the blender is in stand by mode, press the AUTO mode. The blender
will automatically go into vacuum. Vacuuming time will depend on the amount
of ingredients. The blender will automatically go into blend mode at variable
speeds for a total time of 1 minute.
Before removing the jug lid, release the vacuum by lifting the Vacuum
NOTE:
Valve with your fingers.
SMOOTHIE BUTTON
SMOOTHIE mode is perfect for blending smoothies as the time is less than
AUTO mode. Try either mode to see what works best for your ingredients.
While the blender is in stand by mode, press the SMOOTHIE mode. The
blender will automatically go into vacuum. Vacuuming time will depend on
6