Cleaning - Biochef Apollo Manual Y Recetas

Cleaning

After you finish your blending session, you can clean the jug in various ways
depending on the ingredients you have used.
You can rinse the jug and lid directly under the tap and use a clean cloth to
wipe up the residual water.
Make sure the jug is placed in the upright position while drying and not
upside down. Try not to have liquid contacting the underside of the drive
shaft.
Thick or oily residue
• Pour warm water with a few drops of dish washing liquid and turn the dial
around and back a few times. Repeat until most of the residue has been
removed from around the blade assembly and jug sides.
• Rinse the jug and lid under the tap directly and wipe up the residual water
with a dry cloth.
• Wipe the base with a clean and soft cloth. Please make sure the blender is
unplugged before cleaning.
• For a thorough clean, the silicon handle grip can be removed. Start at the
base of the handle and peel up a corner. You may need to use a blunt knife
to get under the lip. Wash silicon and handle in warm soapy water. Reinsert
into the handle.
EN
9