Keep-Warm Function; Delay Function - ARENDO 305598 Manual Del Usuario

3. Then place the steam cooking attachment filled with ingredients on the
vessel and close the appliance lid.
4. Press the "FUNCTION / SELECT" button to select the "STEAM" function.
5. The indicator for "STEAM" flashes for 5 seconds. Once the indicator stops
flashing and you hear a beep, the appliance begins steaming. The display
shows a rotating outer border.
6. As soon as the function starts, the display shows the remaining time (the
time decreases / value becomes smaller).When the process is complete,
you hear 5 "beeps" and the "STEAM" indicator turns off and switches to
keep-warm status. From this point, the display increments the time so that
you can now see for how long the item has been kept warm.

6.7 Keep-warm function

The keep-warm function is automatically started after the cooking is completed.
Alternatively, you can start the keep-warm function manually by pressing the
"Keep Warm / Cancel" button. To switch off the keep-warm function, press the
button again or disconnect the power cord from the socket.

6.8 Delay function

After preparing, press the "FUNCTION / SELECT" button and select the cooking
function you wish to use.
Once the indicator of the selected function starts flashing, press the "PRESET"
button and set the time. The default preset time is 4 hours, which is displayed on
the control panel as "4:00". To change the preset time, press the "PRESET" but-
ton. The preset time is increased each time by 30 minutes. Once the pre-selection
button reaches the maximum preset time, it returns to the minimum preset time
when the button is pressed.
The maximum "PRESET" time is 24 hours, the minimum "PRESET" time is 1 hour.
When the "FUNCTION / SELECT" button is pressed after setting the "PRESET"
time, the preset time does not work and you have to set it again. The delay
function cannot be adjusted / selected after the currently selected function has
been started.
English
31