ENGLISH
Washing the filter in the washing machine
Fig. 28.
1.
Loosen the water supply hose from the rear part of the washing machine.
2.
Pull out the filter with long nose pliers and reinstall it back after being washed.
3.
Use a brush to clean the filter.
4.
Reconnect the water supply hose.
Warning
If the brush is not clean, pull out the filter and wash it separately. Then, reconnect it and turn
on the tap.
Cleaning the detergent dispenser
1.
Press down the arrow on the softener cover inside the dispenser drawer.
2.
Lift the clip up and take out the softener cover and wash all grooves with water.
3.
Place the softener cover again and slightly push the detergent drawer into position.
4.
Pull out the dispenser drawer by pressing the A. Fig. 29.
5.
Clean the dispenser drawer under running water. Fig. 30.
6.
Clean inside the gap with an old toothbrush. Fig 31.
7.
Insert the dispenser drawer. Fig. 32.
Warning
Do not use alcohol, solvents or chemical products to clean the detergent dispenser.
Cleaning the drain pump filter
Warning
-
Be careful with hot water!
-
Allow any possible water remains to cool down.
-
Unplug the machine from the power socket to avoid electric shock before washing.
-
The drain pump filter can filter the yarns and small objects from the washing.
-
Clean the filter periodically to ensure proper operation of the washing machine.
1.
Open the lower cover cap. Fig. 33.
2.
Rotate the emergency drain hose 90°C and pull it out, and remove the hose cap. Fig. 34.
3.
Empty the water in a suitable container, once it is completely empty, reinstall the drain
hose. Fig. 35.
4.
Remove the filter by turning it counterclockwise. Fig. 36.
5.
Remove dust, dirt and other substances or objects. Fig. 37.
6.
Place the filter again in its original position by turning it in the other sense.
7.
Open the lower cover cap. Fig. 38.
66