Section 2 Description; 2.0 General; 2.1 Scope - ESAB Powercut-1300 Manual De Instrucciones

SECTION 2
WArNINg

2.0 general

As shipped, the PowerCut 1300/1600 is fully assembled and ready to cut after being connected to input power
and a source of compressed air. The Powercut package uses the heavy-duty PT-38 (Manual Plasma) torch to de-
liver cutting power for severing materials up to 1-1/2 inch (38 mm) thick on the PC-1300 and 1-3/4 inch (45 mm)
thick on the PC-1600. Refer to the following pages for descriptions of the Powercut packages available as well as
performance specifications.

2.1 Scope

The purpose of this manual is to provide the operator with all the information required to install and operate the
Powercut plasma arc cutting package. Technical reference material is also provided to assist in troubleshooting
the cutting package.
USE THE ESAB PT-38 PLASMArC TOrCH WITH MANUAL CONSOLES.
USE Of TOrCHES NOT DESIgNED fOr USE WITH THIS CONSOLE COULD
CrEATE AN ELECTrIC SHOCK HAZArD.
105
DESCrIPTION