Wayscral Kickway L1 Manual De Instrucciones página 56

6. Take the brake cable in the red sheath and pull it over the front of
the handlebars.
7. Press the brake lever and insert the brake cable head (round
metal part) into the brake lever holder.
8. Pass the section of the silver cable through the slot in the brake
lever until the sheath reaches the brake lever stopper. It may be
necessary to pull on the sheath to perform the operation.
9. Reinstall the hook using the screws and Allen key provided.
10. Check the brake's functioning by operating the lever. The brake
caliper must apply pressure to the brake disc to prevent the wheel
from turning.
56