Application Part: Tube Kit; Application; Inhalation - Vapormed Volcano MEDIC 2 Modo De Empleo

7. T H E U S E O F H E M P F L O W E R S

7.4. Application Part: Tube Kit

When observing the Instructions for Use and with a vaporization temperature of
210°C (410°F) the following reference values are validated in studies:
Drug (Filling
Chamber Content)
drug A (100 mg)
drug B (100 mg)
In order to reach these values, inhalation must be continued until there is no aer-
osol (vapor) recognizable when exhaling. The Filling Chamber's content is then
depleted.

7.4.1. Application

Before using the Tube, switch
off the pump by pressing the
touch button labeled ‚AIR'.
Place the Filling Chamber with cap on
the Hot Air Generator and screw it on
clockwise as far as it will go. Switch on
the heater (HEAT), adjust the set tem-
perature and let it heat up. When the
actual temperature corresponds to the
set temperature, place the Tube Kit on
the Filling Chamber and let it lock in
place.
Cannabinoid
content in drug
THC: approx. 19 mg
THC: approx. 6 mg
CBD: approx. 7,5 mg
107
Cannabinoid con-
tent in Valve Balloon
after vaporization
with 210°C (410°F)
approx. 12 mg
approx. 4 mg
approx. 5 mg

7.4.2. Inhalation

Tube with attached Mouthpiece
Slowly inhale the vapor from the Tube
with the Mouthpiece for a few se-
conds.
Cannabinoid
content in blood
stream (systemic
bioavailability)
after inhalation
approx. 8,25 mg
approx. 2,75 mg
approx. 3,4 mg