Before Use; Operation; First Cleaning - cecotec Cafelizzia 790 Shiny Pro Manual De Instrucciones

3. BEFORE USE

1. Take the product out of the box and remove all packaging material, stickers or labels.
2. Make sure all the components are included, and if not, contact immediately the official
Technical Support Service of Cecotec.

FIRST CLEANING

1. Fill the water tank with water. Water level should not exceed the "Max" mark in the tank.
2. Insert the filter in the funnel and assemble the portafilter into place. Ensure the portafil-
ter is aligned with the lock drawing to ensure it is safely assembled.
3. Connect the device to a power supply and press the power button, the machine will
beep. The 1-coffee and 2-coffee light indicators will turn on and the machine will start
heating.
4. Once the 1-coffee and 2-coffee light indicators remain steady, press the 1-coffee button.
The machine will start the cleaning process. Make sure the steam knob is set at 0. If it is
not, the 4 light indicators will turn on and the machine will not work.
Note: If you want to carry out a more thorough cleaning cycle of the inside parts of the device,
use a 1:4 solution of vinegar and water, or use descaling product. Repeat this process just
with water to remove any rests.

4. OPERATION

• Fill the water tank with water without exceeding the MAX. mark.
• Connect the machine to a power supply and make sure the steam knob is set at O.
ESPRESSO COFFEE
1. While the machine preheats, place the desired coffee filter in
the portafilter and fill it with coffee powder. Use the Measuring
spoon/coffee press to pour and press coffee down. Clean the
excess coffee from the filter's edge.
2. Insert the portafilter in the device and lock it tightly.
3. Once the 1-coffee and 2-coffee light indicators switch from blin-
king to steady, press the desired coffee button for the machine
to brew 1 or 2 coffees.
ENGLISH
CAFELIZZIA 790 SHINY PRO 17