Skywalker Trampolines SBT48.4 Manual Del Usuario página 11

STEP 9
Enclosure tube
3
(x1)
STEP 10
16
Self-tapping Screw (x1)
Insert the enclosure tube (3) into the joint (5) as shown.
Make sure the middle hole in the enclosure tube aligns with the hole in the
joint.
Secure the joint and enclosure tube with screws (16) as shown.
Note: The self tapping screws can be difficult to screw in as the holes are not
prethreaded. Your included tool or a screwdriver will work, but a power drill
can makes things a little easier.
11