eNGLISH
Features and scope of application
4.
FeATUReS AND ScOPe OF APPLIcATION
4.1
Features
The GFX pipe cutting and beveling machines are distinguished by the following characteristics:
Motor
Additional saw blade
clamping point for cutting
tube elbows only
Line laser to determine
cut-off point
Plug connection with
quick-disconnect coupler
50
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
With built-in variable cutting speed and ergonomic handles.
Enables a safer operating position and cutting of tube
elbows without alteration.
Other advantages:
• Electronic overload protection with integrated tempera-
ture monitor and speed control.
• A restart inhibit function prevents the machine from
starting in an uncontrolled way after it has been re-con-
nected to the electric mains or after the voltage supply
has been re-established following a power failure.
• High performance drive (1200 W) with adjustable speed
range for cutting a selection of materials.
• Increased blade life through tachometer regulation.
• Rotating-speed indicator (3) for speed selection.
• Ergonomically positioned speed adjustment wheel (4)
and ON/OFF switch (5).
Which saw blade clamping point to use?
Saw blade clamping point 1:
Cutting tubes
Saw blade clamping point 2:
Cutting tube elbows only
To determine the cut-off point on the tube. Ideal for checking
whether the tube is adjusted to the desired cut-off point. A
red line marking (1), to determine the cut-off point, appears
on the clamped tube once the red button on the line laser
has been actuated. If necessary, the tube position can be
corrected until the desired cut-off point is marked.
For easy and comfortable replacement of the power cable.
Other advantages:
• If there is a cable fracture, then the cutter motor does
not have to be opened and a qualified electrician is not
required to replace the flex cable.
• As the flex cable is locked away, misuse can be
prevented.
GFX 3.0, GFX 6.6
4
3
5
2
1
1
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN