Entering Welding Parameters Manually; Manually Entering Welding Voltage And Time; Entering The String Of Numbers; Downloading The Reports - HURNER HCU 300 Manual De Instrucciones

a bar code is possible, if this feature was enabled in the con-
figuration (see Sect. 10.2).
7

Entering Welding Parameters Manually

To be able to enter the welding parameters manually, you
have first to connect the fitting to the welding unit with
the welding cable. Manual parameter input can then be ac-
cessed by pressing the ò arrow key. The screen will show a
menu as reproduced in Display 10, provided manual input is
enabled in the configuration menu (see Sect. 10.1). In oth-
er words, the manual parameter input replaces reading the
bar code of the fitting with a scanner.
Using the arrow keys ñ and ò you can select "Enter Voltage/
Time" or "Enter Fitting Code" (i.e., the numbers that repre-
sent the code of the fitting to be used). Confirm your selec-
tion by pressing the START/SET key.
7.1

Manually Entering Welding Voltage and Time

If this option was chosen in the manual parameter input
menu, a display like the one to the right appears on the
screen. Use the alphanumeric keypad (see Info in Sect. 5.2)
to set the welding voltage and the welding time, accord-
ing to the fitting manufacturer's instructions, then press the
START/SET key to confirm your input. The "Start ?" message
displayed after the confirmation by START/SET indicates that
the unit is ready for welding.
7.2

Entering the String of Numbers

If this option was chosen in the manual parameter input
menu, the "Enter Fitting Code" display shows. The 24 char-
acters of the fitting code to be entered display as asterisks
( * ). Use the alphanumeric keypad (see Info in Sect. 5.2) to
enter the code and press START/SET to confirm your input
and have it decoded. If the code entered is not correct, an
"Input Error" message appears; check the string of numbers
and correct as needed. If the code is correct, the decoded
data is displayed, and the "Start ?" message indicates that
the unit is ready to start welding.
8

Downloading the Reports

Interfaces
Bluetooth Wireless Interface
14
EN
HÜRNER HCU 300 User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
** Manual Input
Enter Voltage/Time
>Enter Fitting Code
Voltage/Time
U= 40 V
Version September 2022
**
Display 10
t= 1000 s
Display 11