Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
21
Attaching door panels
Ask for assistance to lift the assembly unit upright and position it near the final location.
□
□
Using the pilot holes as a guide, pick up the left door (V) and fasten the hinge bases onto the left side panel (Q) with
eight nickel screws (PP).
□
Repeat the same process with the right door (W).
Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a
□
good fit. Refer to the hinge sticker on door for adjustment.
Q
22
Installing adjustable shelves
□
Open the doors and insert four shelf supports (JJ) into the holes at the desired height inside each side
compartment. Make sure you place the four shelf supports at the same level to make the shelf level.
Tilt and rest the adjustable shelves (C1) onto the shelf supports (JJ).
□
Q
N
V
N
C1
T
W
JJ
C1
15
PP
C1
JJ
Publicidad
