Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly (continued)
33
Installing fireplace insert
Lift the fireplace insert carefully into the back of the assembled mantel and center it on the bottom panel in the
□
opening.
Use the pilot holes as a guide, fasten two L-shaped brackets (KK) onto the firebox support (Z) with four pan head
□
screws (BB). Make sure that the right angle side is flush with the short edge of firebox support (Z).
□
Use the pilot holes as a guide, fasten the firebox support (Z) between the partition panels (R and S) with four pan
head screws (BB).
T
34
Installing the acrylic stopper
□
Remove the paper backing of acrylic stopper (UU), then properly align the acrylic stopper into the cutout on the
acrylic stopper template on the front of the top panel (N). Press down on the acrylic stopper to help adhesion.
NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat panel television on
the top panel. Otherwise, skip to next step.
At the back of top panel (N), grip the heads of plastic tacks with pliers, with twisting motion pull tacks loose to remove
□
the acrylic stopper template.
N
N
Q
Z
N
T
N
T
21
BB
KK
Z
R/S
Z
BB
Publicidad
