Publicidad
Idiomas disponibles
Idiomas disponibles
1
Safety Information
Laser Safety
Laser Safety
The Agilent 2100 Bioanalyzer instrument is classified as a class 1 laser product
(IEC/EN 60825-1:2014). During operation of the instrument, no laser light is
accessible to the user.
When the laser is in use, the laser light source emits light at a power that may be
harmful to the eyes. To prevent operator exposure to potentially harmful laser
light, an interlock mechanism turns off the laser whenever the lid of the Agilent
2100 Bioanalyzer instrument is not closed. Furthermore, the lid cannot be
completely opened and has a black light absorbing surface to prevent any
potential laser light reflection.
The laser light source is securely enclosed within the instrument and is by design
not accessible. It is not allowed to access the laser source.
The laser source is a class 3B laser with a maximum output power of 10 mW
(CW) at a wavelength between 625 and 640 nm.
Harmful laser light
WARN IN G
The laser light source emits light at a power that may be harmful to the
eyes.
Use of controls or adjustments or performance of procedures other than those
NOT E
specified herein may result in hazardous radiation exposure.
Complies with FDA performance standards for laser products except for
NOT E
conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated
May 8, 2019.
14
Avoid exposure to the beam.
Never look into the beam or direct it towards someone else.
System interlocks should never be disabled.
The laser source may not be accessed.
In case of defective instrument or laser contact Agilent Technologies.
Publicidad
