Strain Relief; Switching On - Stihl HSE 61 Manual De Instrucciones

5 Switching On

1
► Insert the plug (1) into the extension cord cou‐
pling (2).
4.2

Strain Relief

The strain relief (cord retainer) protects the con‐
necting cord against damage.
► Make a loop (3) in the extension cord.
► Pass the loop (3) through the opening (4).
0458-279-9821-E
2
5
4
► Slip the loop (3) over the hook (5) and pull it
tight.
► Connect the extension cord plug to a properly
installed wall outlet.
5 Switching On
► Make sure you have a secure and balanced
footing.
► Stand upright – hold the power tool in a
relaxed position.
► Make sure the cutting attachment is not touch‐
ing the ground or any other objects.
► Hold the unit with both hands – one hand on
the control handle – one hand on the loop han‐
dle.
► Push the switch lever (1) against the loop han‐
dle and hold it there.
► Push down the trigger switch lockout (2),
depress the trigger switch (3) and hold them in
that position.
The machine is designed for two-hand operation,
i.e. it will run only when the operator's hands are
on the switch lever (1) and trigger switch (3).
5.1 To extend reach
3
► Hold the power tool with both hands – one
hand on the control handle – one hand on the
auxiliary switch at the rear end of the control
handle.
► Operate the auxiliary switch (4) and hold it in
that position.
2
1
3
2
4
3
English
25