Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Short press the EMG key (5) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (9) to
disappears from the display.
5.
If no key is pressed, the unit
exits
from the display.
Default COLOR is:
(orange).
2) DIMMER
DIMMER function allows
adjusting
from 0 to 9.
Press F key (9).
is displayed.
Long press F key (9) to
enter
the MENU.
1.
Turn the rotary CH knob (6) or use UP/DN buttons (13) on the microphone
to
select
the
menu.
2.
Press EMG key (5) to
validate.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (13) on the microphone
to
change
the value of the dimmer.
4.
Short press the EMG key (5) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (9) to
disappears from the display.
5.
If no key is pressed, the unit
exits
from the display.
Dimmer default value is : 5.
3) TONE
This function allows to
change
Press F key (9).
is displayed.
Long press F key (9) to
enter
the MENU.
1.
Turn the rotary CH knob (6) or use UP/DN buttons (13) on the microphone
select
to
the
menu.
2.
Press EMG key (5) to
validate.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (13) on the microphone
change
to
the value of the tone.
4.
Short press the EMG key (5) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (9) to
disappears from the display.
5.
If no key is pressed, the unit
exits
from the display.
Tone default value is : 0
validate
exit
the MENU.
and
MENU after 10 seconds.
disappears
the brightness of the lighting. 10 steps
The current value blinks on the display.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
RX
the
TONE. 11 steps from -5 to +5
The current value blinks on the display.
validate
exit
the MENU.
and
MENU after 10 seconds.
disappears
4) KEY BEEP
When the function is activated, a beep
changing the channel etc. "BP" appears on the display when the function
is active.
Press F key (9).
is displayed.
Long press F key (9) to
enter
1.
Turn the rotary CH knob (6) or use UP/DN buttons (13) on the microphone
to
select
the
menu.
2.
Press EMG key (5) to
validate.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (13) on the microphone
activate
( on) /
deactivate
to
4.
Short press the EMG key (5) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (9) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
Default KEY BEEP is On.
5) ROGER BEEP
When the function is active, the icon
The Roger Beep
sounds
when the PTT switch (11) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Press F key (9).
is displayed.
Long press F key (9) to
enter
1.
Turn the rotary CH knob (6) or use UP/DN buttons (13) on the microphone
select
to
the
menu.
2.
Press EMG key (5) to
validate.
3.
Turn the rotary CH knob (6) or use the UP/DN buttons (13) on the microphone
( 1 to 6*) /
to
activate
deactivate
4.
Short press the EMG key (5) to validate. a) Return to the point 1 to set an-
other menu or b) Short press the F key (9) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
*6 roger tones for ROGER BEEP.
Default ROGER BEEP is OF.
46
sounds
when a key is pressed, by
the MENU.
The current value blinks on the display.
( of) the function.
validate
exit
and
exits
MENU after 10 seconds.
appears on the display.
the MENU.
The current value blinks on the display.
(OF) the function.
validate
exit
and
exits
MENU after 10 seconds.
the MENU.
disappears
the MENU.
disappears
Publicidad
