Sagola V 4000 Manual De Instrucciones página 49

48/49
The spraygun has been designed for use at ambient temperature. Its maximum service tempera-
ture is 60°C. Although the air temperature of the compressed air or product is higher, this must not
exceed the maximum average temperature in the body of the airbrush. If the temperature excedes
43°C, it is necessary to use personal protective equipment, such as gloves to thermally insulate your
hands from the unit.
The use of solvents and/or detergents that contain halogenated hy-
drocarbons (trichloroethane, methyl chloride, etc.), may cause che-
mical reactions in the unit as well as in its zinc-coated components
(trichloroethane mixed with small amounts of water produces hydro-
chloric acid). For this reason, these components may rust and in extre-
me cases the chemical reaction caused may be explosive. We recom-
mend you to use products that do not contain the aforementioned
components. Do not use acids, soda (alkalis or pickling substances,
etc.) for cleaning under any circumstances.
In general, precautions must be taken whenever the spray gun is handled, in order to prevent any
damage to this.
Connectors must be securely tightened and in good condition. Safety
standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting the
physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Always keep the safety sheets for the products to apply and the cleaning liquids to hand in case
you need to consult them.
ENGLISH