Operation - HomeMatic IP HmIP-WTH-B-2 Manual De Instalacion Y Uso

• Use the plus or minus buttons to select the temperature for the
holiday mode and confirm with the menu button..
To confirm, the symbol flashes twice and the device changes to holiday
mode.
7

Operation

After pairing and mounting have been performed, simple operations are
available directly on the device.
• Temperature: Press the left (D) or right (F) push-button to manually
change the temperature. In automatic mode, the manually set
temperature will remain the same until the next point at which
the profile changes. Afterwards, the defined heating profile will
be activated again. During manual operation, the temperature
remains activated until the next manual change.
• Boost function: Press the boost button (E) briefly to activate the
boost function for heating up the radiator quickly and briefly by
opening the valve. There will be a pleasant room temperature
right away because of the radiated heat.
The boost function can only be activated if the wall thermostat is
used in connection with a radiator thermostat, floor heating actuator
or a switch actuator.
Operation
51