Descargar Imprimir esta página

Care And Maintenance Instructions - EXPERT GRILL 910-0014 Guia Del Propietario

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: MAKE SURE THAT THE GRILL IS COOLED AND UNPLUGGED FROM
THE POWER SOURCE BEFORE PERFORMING ANY CLEANING OR MAINTENANCE.
Interior
COOKING GRID
After the grill has cooled, scrub both sides of the cooking grates with a wire-bristled grill brush.
Any stubborn, baked-on food residue can be scraped off with a scraper.
Grates can also be removed from the grill and washed with dish soap and warm water. Dry thoroughly.
The cooking grates should be cleaned after each use.
GREASE SYSTEM
Remove the cooking grids and scrape food and grease residue off the grease tray using a scraper or grill brush.
Grease tray can also be removed from the grill and washed with dish soap and warm water. Dry thoroughly.
Grease cup can be lined with foil grease cup liners for easy clean-up.
The grease tray should be cleaned after each use. The grease cup should be emptied once it reaches ¾ full.
INTERIOR SURFACES
Brush or scrape off any grease or debris accumulated on the interior surfaces using a scraper or grill brush.
Vacuum ash and food remnants out of the bottom of the firebox and firepot.
All surfaces can be washed with mild, soapy water and/or a mild degreaser. Dry thoroughly.
Interior surfaces should be monitored and cleaned when build-up of grease and debris has accumulated, but not less
than twice per year.
EXTERIOR
COATED AND PLASTIC SURFACES
After the grill has cooled completely, exterior surfaces can be wiped down with a mild mixture of soap and water. Dry
thoroughly.
Do not use abrasive cleaners.
DO NOT SPRAY THE GRILL WITH A GARDEN HOSE OR POWER WASHER AS THIS
MAY DAMAGE ELECTRICAL COMPONENTS.
STORAGE
Always store your grill with a cover between uses to prevent corrosion or other damage to the grill, especially if it is
stored in a rainy or humid environment.
Do not store the grill with the hopper and/or auger full of pellets, especially in wet or humid conditions. Moisture will
expand the pellets and can lead to an auger jam. Use the pellet quick release door located at the back of the hopper
to empty leftover pellets into a container and burn off any pellets remaining in the auger before storage.
Store spare wood pellets in an airtight container, away from heat-producing appliances, moisture, and other fuel
containers. Before use, check the freshness of your pellets by breaking one in half. The pellet should break with a
snap. If it crumbles, that means your pellet Is not fresh and will impact the performance of the grill.

Care and Maintenance Instructions

39

Publicidad

Solución de problemas

loading