Husqvarna 320iL Manual De Usuario página 10

• Make sure that the cutter on the trimmer
guard is not damaged.
• Make sure that the trimmer line is wound
tightly and equally around the drum to prevent
unusual vibrations from the product. Different
cord lengths can result in vibrations that are
not necessary. Tap the trimmer head to get
correct length on the cord.
Safety devices on the product
WARNING:
instructions that follow before you use
the product.
In this section the product's safety features,
its purpose and how checks and maintenance
should be carried out to ensure that it operates
correctly. See instructions under the heading
Product overview on page 2 to find where these
parts are located on your product.
The life span of the product can be reduced
and the risk of accidents can increase if product
maintenance is not carried out correctly and
if service and/or repairs are not carried out
professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
with defective safety components. The
product's safety equipment must be
inspected and maintained as described
in this section. If your product fails any
of these checks, contact your service
agent to get it repaired.
CAUTION:
work on the machine requires special
training. This is especially true of
the machine's safety equipment. If
your machine fails any of the checks
described below you must contact
your service agent. When you buy
any of our products we guarantee the
availability of professional repairs and
service. If the retailer who sells your
machine is not a servicing dealer, ask
him for the address of your nearest
service agent.
10
Read the warning
Never use a product
All servicing and repair
To do a check of the keypad
• Push and hold the power button (A).
B
a) The product is on when the LED (B) is on.
b) The product is off when the LED (B) is off.
To do a check of the power trigger lockout
The power trigger lockout prevents accidental
start. When you push the power trigger lockout
(A) forward, it releases the power trigger (B).
When you release the handle, the power trigger
and the power trigger lockout move back to their
initial positions.
A
1. Make sure that the power trigger is locked
when the power trigger lockout is in its initial
position.
A
B
1511 - 009 - 07.07.2022