Maintenance Schedule; Maintenance - Husqvarna 320iL Manual De Usuario

Introduction
WARNING:
the safety chapter before you do
maintenance on the product.

Maintenance schedule

WARNING:
before you do maintenance.

Maintenance

Clean the external parts of the product with a dry cloth. Do not use
water.
Examine that the power button works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout func-
tion correctly from a safety point of view.
Make sure that all controls work and are not damaged.
Keep the handles dry, clean and free from oil and grease.
Make sure that the cutting attachment is not damaged. Replace the
cutting attachment if it is damaged.
Make sure that the cutting attachment guard is not damaged. Replace
the cutting attachment guard if it is damaged.
Make sure that the screws and nuts are tight.
Make sure that the battery release buttons on the battery works and
locks the battery in the product.
Examine that the battery charger is not damaged and function correct-
ly.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Examine all couplings and connections. Make sure they are not dam-
aged and free from dirt.
Do a check of the connections between the battery and the product.
Do a check of the connection between the battery and the battery
charger.
18
Maintenance
Read and understand
Remove the battery
The following is a list of the maintenance steps
that you must do on the product. See
on page 18 for more information.
Introduction
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1511 - 009 - 07.07.2022
X