Publicidad
Idiomas disponibles
Idiomas disponibles
Check the strength of the machine connections before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorised recommissioning.
The machine may only be operated, serviced or repaired by persons who are familiar with it
•
and who have been informed of the hazards arising from this work.
Ensure that unauthorised persons maintain a safe distance from the machine and keep chil-
•
dren away from the machine.
Wear suitable work clothing and footwear.
•
Always work with care and the necessary caution and never use excessive force.
•
Shut down the machine and disconnect it from the power supply before carrying out any ad-
•
justment, conversion, cleaning, maintenance or repair work. Before starting any work on the
machine, wait until all tools or machine parts have come to a complete standstill and secure
the machine against unintentional restarting.
•
Do not work on the machine if it is tired, not concentrated or under the influence of medica-
tion, alcohol or drugs!
11.4
Special safety instructions for this machine
Caution in slippery conditions - slip hazard - risk of injury. When working, wear robust and
•
non-slip footwear. Slides / stumble / traps are a major cause of serious injury or death.
Never use the machine when it is raining or in damp, wet areas.
•
Always use both hands to hold the machine when in use.
•
Before start, after failure or shock, be sure to check the machine and make sure that it is in
•
good condition.
Take special care when work near swimming pools or garden ponds.
•
•
Unplug battery before all maintenance and settings!
:
CHARGER
•
The charger is designed exclusively to charge the battery of this machine. Charging other
batteries is not permitted.
Never use the charger in a damp or wet environment.
•
•
Disconnect cable connections only by pulling the plug. Pulling on the cable could damage
the cable and plug and electrical safety would no longer be guaranteed.
•
Never use the charger if the cable, plug or the machine itself are damaged by external influ-
ences. Then take the charger to the nearest specialist workshop.
Do not operate the machine in close proximity to heat sources.
•
•
Do not use an extension cord to plug in the charging station's power supply.
•
Do not place any metal objects in the area of the charging contacts of the charger.
•
Do not open the charger. In case of failure, contact a specialist workshop.
Only use the original charger to charge the battery. If other chargers are used, defects may
•
occur or a fire might be caused.
BATTERY:
•
Vapors may be emitted during improper use or when using damaged batteries. These va-
pors can irritate the respiratory tract. Inhale fresh air and consult a physician if you experi-
ence any discomfort.
FIRE HAZARD! Never charge batteries near acids and flammable materials.
•
•
Only charge the battery in an ambient temperature between 0° C and +40° C. Allow to cool
down first after heavy load.
EXPLOSION HAZARD! Protect the battery from heat and fire.
•
Only use the battery in an ambient temperature between 0° C and +45° C.
•
•
HAZARD OF SHORT-CIRCUIT! For disposal, transport or storage, the battery must be packed
(plastic bag, box) or the contacts must be taped.
Never open the battery.
•
11.5
Hazard warnings
Despite their intended use, certain residual risks remain. Due to the structure and construction of
the machine, hazardous situations may occur when handling the machines:
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
ZI-EWB500-AKKU
SAFETY
22
Publicidad
