Zipper ZI-EWB500 Instrucciones De Servicio página 24

ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
2. Step
First disassemble the nuts (4) and washers (5)
attached to both sides of the motor wheel (1).
Install the motor wheel (1) on each side by
means of a washer (5) and a nut (4) at the
frame (2).
Note:
The wheel must be assembled so that the
cable (3) is placed on the right side.
3. Step
Assemble the support (1) to the handles (L, R)
using one hex screw (2), 2 washers (3), and
one nut (4) each.
4. Step
Fasten the cable (1) of the motor wheel to the
frame (2) using cable ties (3).
Fasten the cable (4) to the right handle (R) us-
ing cable ties (3).
ASSEMBLY
24