Operation; Operation Instructions; Start Electrical Support - Zipper ZI-EWB500 Instrucciones De Servicio

13

OPERATION

Only operate the machine when it is in perfect condition. Inspect the machine visually every time it is to
be used. Check in particular the safety equipment, electrical controls, electric cables and screwed connec-
tion for damage and if tightened properly. Replace any damaged parts before operating the machine.
13.1

Operation instructions

Unplug battery before all maintenance and settings!
Never remove the battery while the machine is running
In case of longer standstill, press the shut-down button
Use the electric motor only with sufficient battery charge
13.2 Operation
13.2.1

Start electrical support

ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
8. Step
Connect the 6-prong plug to position (1), the
5-prong plug to position (2) and the 3-prong
plug to position (3).
Assembly completed
WARNING
NOTICE
1. Set the ON-OFF switch (1) on the battery
box system to "I" = ON.
2. Press the red button (2).
3. Turn the lever (3) on the control element to
set the electrical support; the further the
control lever is pressed down, the more
electrical support is provided.
OPERATION
26