2Stopping The Machine; Charger - Zipper ZI-EWB500 Instrucciones De Servicio

13.2.2 Stopping the machine
13.3

Charger

Charging the battery:
LED- indication of the battery charge level on the control element:
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
1. Turn the lever (1) back to the home position
to switch off the electrical support.
2. Press the red button (2).
3. Set the ON-OFF switch (3) on the battery
box system to "O" = OFF.
1. Connect the charger to the power supply
(AC outlet) 230 V / 50 Hz and the charger
plug (1) at the battery box system.
2. Charge the battery as long as the red LED
(2) lights up.
3. When the battery is fully charged, the green
LED (3) will light up.
4. Disconnect the charger from the power
supply and the charger plug.
All 3 LEDs light up when the red button (1) is
pressed.
When the electrical support lever (2) is actu-
ated, the battery charge level is displayed as
follows:
- All 3 LEDs light up:
Battery charge level between 100-50%
- Only red and orange LEDs light up:
Battery charge level between 50-10%
- Only the red LED lights up:
Please charbe the battery
OPERATION
27