Esoteric Grandioso T1 Manual Del Usuario página 17

Place the installation rails so that they touch the base unit feet
at the places shown by the arrows. (The base unit is shown by
dashed lines for this explanation.)
14
Remove the transportation screws from the
bottom of the motor unit.
o The removed screws will be necessary for transportation, so
save them so they will not be lost. After installation is com-
plete, attach the transportation screws to the screw holes in
the installation rail (R).
15
Set the micrometer value for the motor unit to 3.
16
Following the installation rails, insert the motor
unit.
Insert the motor unit until there are no spaces between it, the
platter and the spacer block.
o When inserting the motor unit, be careful not to let it touch
the base unit.
o If the motor unit and the base unit touch, use the height con-
firmation gauge and adjust the base unit height.
Continued on the next page
e
17