Esoteric Grandioso T1 Manual Del Usuario página 19

Removing the motor unit
1
Attach the protective covers to the base unit at
the locations shown by the arrows.
2
Place the spacer block between the motor unit
and the platter as shown in the illustration.
3
Place the installation rails between the base
unit feet.
o Remove the transportation screws from the installation rails if
they have been attached.
Place the installation rails so that they touch the base unit feet
at the places shown by the arrows. (The base unit is shown by
dashed lines for this explanation.)
4
Remove the cables connected to the motor unit
and tonearm.
5
Pull out the motor unit.
6
Remove the installation rails, spacer block and
protective covers.
19