Craftsman 247.887801 Manual Del Operador página 32

Craftsman Snow Thrower Model 247.887801
1.KEEP AWAY FROM ROTATING
AUGER CONTACT WITH AUGER
CAN AMPUTATE HANDS AND FEET.
2.DISENGAGE CLUTCH LEVERS, STOP
ENGINE, AND REMAIN BEHIND
HANDLES UNTIL ALL MOVING PARTS
HAVE STOPPED BEFORE UNCLOGGING
OR SERVICING MACHINE.
3.TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT
BYSTANDERS USE EXTRA CAUTION
WHEN OPERATING ON GRAVEL
SURFACES.
4.READ OPERATOR'S MANUAL.
777D18032
179 4-CYCLE OHV
cc
777S33118
DANGER
AVOID INJU RY FROM
ROTATING AUGER-
KEEP HANDS, FEET
AND CLOTHING AWAY.
PARTS LIST
STARTING
INSTRUCTIONS:
1.) INSERT IGNITION KEY AND SNAP IN PLACE.
2.) MOVE CHOKE CONTROL TO THE "CHOKE"
POSITION. PUSH PRIMER BUTTON 3x.
ROPE START: PULL SLOWLY UNTIL HARDER
3.)
TO PULL, THEN PULL RAPIDLY TO START.
REPEAT PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN.
CONNECT POWER CORD AND PUSH STARTER
BUTTON. REPEAT PRIMING IF NEEDED.
4.) MOVE CHOKE CONTROL SLOWLY TO THE
"RUN" POSITION.
5.) TO STOP ENGINE: PULL KEY OUT.
RUN RUN CHOKE CHOKE
CHOKE BELOW
21
777I22139
777S34027
777S33731
777D16367
32
Do not use electric start in the rain
Do not run starter more than 10 times
at intervals of 5 Seconds On /
5 seconds Off.
If engine does not start, consult
operators manual.
777S32236
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL AL L
MOVING PARTS HA VE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.
DO NOT
USE E85 OR FUEL
CONTAINING MORE
THAN 10% ETHANOL
777X43688
STOP