Care And Cleaning; Avoiding Bad Odors; Protecting The Plastic Surfaces; Cleaning The Inner Surface - Fulgor Milano FBCD 761 TNF EDBL Manual De Usuario

6 Care and Cleaning

EN
Service life of the product will extend and frequently
encountered problems will decrease if the product is cleaned
periodically.
Never use gasoline, benzene or similar substances for cleaning
purposes.
Never use any sharp abrasive instruments, soap, household
cleaners, detergent or wax polish for cleaning.
Dissolve one teaspoon of carbonate in half liter of water Soak
a cloth in the solution and wring it thoroughly. Wipe the interior
of the refrigerator with this cloth and the dry thoroughly.
Make sure that no water enters the lamp housing or other
electrical parts.
If you will not use the refrigerator for a long time, unplug it,
remove all food inside, clean it and leave the door ajar.
Check regularly that the door gaskets are clean. If not, clean
them.
Take out all items in the product to remove the door and body
shelves.
Remove the door shelves by pulling them up. Slide the shelves
downwards to re-install them after cleaning.
Never use chloric cleaning agents or water to clean outer
surfaces or chromecoated parts of the product. Chlorine
causes abrasion on such metal surfaces.

6.1 Avoiding Bad Odors

Materials that may cause odor are not used in the production
of our refrigerators. However, odor may be emitted if foods are
stored improperly or if the inner surface of the product is not
cleaned as required.
Please consider the following to avoid this problem:
• It is important that the refrigerator is kept clean.
• Food residuals, stains, etc. can cause odor.
• For this reason, clean your refrigerator with carbonate
solved in water every 15 days. Never use detergents or
soap.
• Keep your foods in closed vessels. Microorganisms emitted
from vessels without a cover may cause unpleasant odors.
• Never keep expired or spoiled foods in your refrigerator.

6.2. Protecting the Plastic Surfaces

Do not put liquid oils or oil-cooked meals in your refrigerator
in unsealed containers as they damage the plastic surfaces of
your refrigerator.
If oil is spilled or smeared onto the plastic surfaces, clean
and rinse the relevant part of the surface with warm water
immediately.
WARNING
Switch off the product before cleaning.
B
It is recommended to clean the condenser every six
months using gloves.
You must not use vacuum cleaners.
12

6.3 Cleaning the Inner Surface

To clean the inner surfaces and all removable parts, wash them
with a mild solution comprising soap, water and carbonate.
Rinse and dry thoroughly.
Prevent the water from contacting the lighting means and
control panel.

6.4 Stainless Steel Outer Surfaces

Use a stainless steel cleaning agent that is non- abrasive and
apply it with a lint-free, soft cloth.
For polishing, wipe the surface softly with a damp microfiber
cloth and use dry wash-leather.
Always follow the strands of the stainless steel.
ATTENTION
A
Do not use vinegar, rubbing alcohol or other alcohol-
based cleaning agents on any of the inner surfaces.