Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction Manual Piscis
DISASSEMBLING YOUR SCOOTER
The scooter is easy to disassembly and you can transport it by car. Tools are not necçcessary. To assemble the scooter,
you can repeat the disassembly directions in reverse.
1. Remove seat by releasing Seat Rotation Lever and then lift Off.
2. Remove Rear Shroud ou the Scooter
3. Remove Battery Fixing Velcro
4. Detach Battery Power Plugs.
5. Remove two Batteries.
6. By removing the Front Basket and Adjusting the tiller down by using the Tiller Angle Adjustment.
7. There are 5 main parts after disassembling the scooter
Fuse Replacement
1. Remove the front cover screws (R), the arrow indicates the direction. (Caution, the screws have different sizes).
2. Then open the box where the fuses are located (R1) and replace it with a backup fuse (R2), the fuse must be of the
same rating.
CLEANING AND MAINTAINING YOUR SCOOTER
If your scooter is dirty, use a damp or lightly soapy cloth to wipe it down. Do not use running water to wash or rinse the
scooter in order to protect the electrical parts. Polish with an automotive liquid polish.
1.
5.
All maintenance and repair of your scooter should be done by an authorized dealer.
The following areas required periodic inspection:
- Tire pressure between 30-50 psi.
- All electrical connections are firmly attached.
ES
(R2)
(R1)
(R)
(R)
2.
6.
EN
FR
IT
DE
3.
7.
PT NL
SWE
PL
(S)
4.
DK
12
Publicidad
