Publicidad
Idiomas disponibles
Idiomas disponibles
EN
After adding water, should press the start knob to continue the baking process.
Menu function introduction
Press the ON/OFF button after powering on. All lights on the control panel light
up. Then press the MENU button to enter the menu mode. Rotate the selection
knob, the menu is cycling on the digital screen. After selecting the desired menu,
set the temperature and time, and press the selection knob to start. To cancel the
menu, press the knob again, press the menu button and rotate the selection knob
to select the menu again.
Descaling function introduction
The steam function accumulates to 80H, and enter the initial interface. The icon
"DESCSAL" lights up first, other icons are off, reminder the user to clean. Add citric
acid into the water tank and pour in more than 600ml purified water, close the
door ,press the selection knob directly, the descaling function is started. As the
descaling function is divided into three stages: descaling (30 minutes), primary
cleaning (10 minutes) and secondary cleaning (10 minutes), the appliance alarm
will "dididi" sound after the descaling function working for 30 minutes, at this
time, pour out the water from the waste water box and water tank, and add new
purified water into the water tank. After putting the water tank into the housing,
close the door to start the primary cleaning step, 10 minutes later, the appliance
alarm will "dididi" sound again, at this time, pour out the water from the waste
water box and water tank, and add new purified water into the water tank. After
putting the water tank into the housing, close the door to start the secondary
cleaning. After the above operation, the descaling is completed.
If the user does not clean, can turn the knob or press other buttons except the
start button to enter the normal initial state. But if the user does not clean, the
descaling will still be remindered by next time when it's power on. The buzzer rings
for a long time until the user selects this mode or enter the normal operation
interface.
Note:
Need unplug after descaling, you can continue to use it only when the the
appliance cool down, the descaling time is 50 minutes.
38
Publicidad
