Resolution Selection - Starrett 2900 Serie Manual Del Usuario

ENGLISH
4. Press the MIN/MAX/TIR button. The MIN icon will
appear on the display.
5. Press the ZERO/ABS button to measure the part.
6. Move the part under the indicator to find the
low spot. You will know because the value will not
change.
7. Press the MIN/MAX/TIR button. The MAX icon will
appear on the display.
8. Press the ZERO/ABS button to measure the part.
9. Move the part under the indicator to find the
high spot. You will know because the value will not
change.
10. Press the MIN/MAX/TIR button. The TIR icon will
appear on the display, and the display will show the
value of the TIR.
11. Replace the part being measured, and repeat the
sequence starting at step two.
1 - To start measuring in Min mode;
Press
2 - Next, to start measuring in Max mode;
Press
MAX/TIR
3 - To display the TIR value;
Press
MAX/TIR

2.3 Resolution Selection

Enter the Resolution mode by pressing the SET/SHIFT button followed by the RES
button. The choices are displayed sequentially from high to low resolution with the
associated units. The round off accommodates the range of values in the table below.
Round Off Condition
Round Off Enabled
Round Off Disabled
Round Off Enabled
Round Off Disabled
10
MIN/
MAX/TIR
MIN/
MIN/
English
In Mode
000.00005
000.0001
00.0005
00.001
Then
Then
Metric
mm Mode
0000.001
0000.001
0000.01
0000.01
ZERO
ABS
ZERO
ABS