auna MC40 DAB Manual De Instrucciones página 42

EN
42
Stereo or Mono.
Other FM menu operation
Press the MENU button on the remote control to access the menu control.
Then press the ⏮ or ⏭ button for different options as described below.
Scan Setting
1. Press the MENU button on the remote control to access the menu
control.
2. Press the ⏮ or ⏭ button until "SCAN" is displayed and then press the
ENTER button.
3. Press the ⏮ or ⏭ button to toggle between "ALL" or "STRONG"
selections and then press the ENTER button confirm. When "ALL" is
selected, all stations will be detected during FM scanning even if the
radio station is noisy. When the "STRONG" is selected, only the strong
stations are detected. Scanning will ignore those noisy stations.
4. The next time doing a FM scan the unit will search for the stations based
on this confirmed setting.
Audio Setting
1. Press the MENU button on the remote control to access the menu
control.
2. Press the ⏮ or ⏭ button until "AUDIO" is displayed and then press the
ENTER button.
3. Press the ⏮ or ⏭ button to toggle between "STEREO" or "MONO"
selection and then press the ENTER button confirm.