WERKU WK400030 Instrucciones Originales página 2

CE DECLARATION CONFORMITY.
®
Werku declares that the WK400030 sander is in
accordance with the following Directives and Stan-
dards:
2006/42/EC
2014/30/EU
EN 60745-1:2009/A11:2010
EN 60745-2-3:2011/A12:2014
EN 55014-1:2006/A2:2011
EN 55014-2:1997/A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
La Coruña, 01/08/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power .......................................................... 750W
Class ................................................................... II
Protection index ............................................ IP20
Speed rate ................................... 1000-2100 min
Speeds ............................................................... 6
Disc diameter .......................................... 225 mm
Total length .................................. 1300-1800 mm
Graduation ................................................... 0-45º
Net weight .................................................. 4.1 kg
Acoustic pressure LpA ......................... 83.1 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ........................ 94.1 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah ..........................................1.171 m/s²
Respective uncertainity Kh ..................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been mea-
sured in accordance with a standard test method
and may be used for comparing one power tool with
another. The declared vibration total value may also
be used in a preliminary assessment of exposure.
Warning: vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the power tool is
used. Warning: identify safety measures to protect
the operator, based on an estimation of exposure in
the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear mouth and nose protection
Double insulation
European conformity
2002/96/CE Directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a sander.
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Fai-
lure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. Keep all war-
-1
nings and all instructions for future reference. Acci-
dents can be avoided in many cases by recognizing
a potentially hazardous situation before it occurs and
by observing appropriate safety procedures. Opera-
tions, such as grinding, wire brushing, polishing or
cutting-off are not recommended to be performed
with this power tool. Operations for which this power
tool was not designed may create a hazard and cau-
se personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks could
ignite these materials. Keep away from children
and curious while operating a power tool. Distrac-
tions can cause you to lose control.Keep bystan-
ders a safe distance away from work area. Anyone
entering the work area must wear personal protec-
tive equipment. Fragments of work piece or of a
broken accessory may fly away and cause injury
beyond immediate area of operation.
English 2
TÜV-GS Certification