Bonaire Window Cooler
Maintenance
Motor and Blower Wheel
Check that the blower wheel spins freely. Check the motor for corrosion and spray with an anti-corrosive
agent if necessary.
Pump Operation
Check the pump spins freely and that the strainer is clean.
After a long idle period, the pump may stop rotating due to a mineral build up on the stainless shaft adjacent
to the motor. To free the pump shaft, remove mineral build up and rotate the shaft using fingers or suitable
sized pliers.
Spraying the area with suitable water displacement lubricate (such as WD-40®) may assist.
Electrical
No general maintenance is required to the electrical system.
Electrical connections and maintenance should only be carried out by a qualified
electrician.
15
Page