Publicidad
Idiomas disponibles
Idiomas disponibles
Bonaire Window Cooler
Operation Instructions
Unit Operation
It is essential for successful operation of the evaporative cooler that there be sufficient free air openings in the
room to be cooled
approximately 0.5m² (5.4² feet). Open doors and windows will usually provide this as per
the diagrams below.
Please Note: - It is important for good ventilation that doors or windows are not open on the windward side
of the house. Please note the room furthest away from the cooler needs to have more ventilation than rooms
closest to the cooler.
Cooler Operation
Before Starting
Always ensure that there is another open window or door through which the air can exhaust to other
parts of the house.
Ensure that the filters are kept clean.
Ensure that the water to the cooler is turned on.
Ensure the plug is connected to a110V 60Hz single phase grounded appliance socket on the inside
of the house and turned on.
IMPORTANT. After the first 10 hours of operation in COOL mode, the water must be drained from
the unit water tank to remove any new product residuals. This process must be repeated after a
further 10 hours of COOL mode operation. (See page 12 for removing the Drain Plug). To clean the
tank you must only remove the Drain Plug.
5
Page
Publicidad
