Make A Foodsaver ® Bag; How To; Fig. 1 - FoodSaver V4400 Serie Manual Del Propietário

How to...

1. Make a FoodSaver
1. Open appliance door
(Fig. 1). For best results, insert roll with material flap
down.
2. Lift up Roll Cutter Bar
the cutter bar (Fig. 2).
3. Pull out enough bag material to hold item being vacuum
sealed, plus 3 inches (7.62 cm). Lower the Roll Cutter
Bar and slide Bag Cutter
3).
4. Press Seal Button
illuminate (Fig. 4).
5. Using two hands, slowly insert open end of bag, curled
down, into Vacuum Channel
6. When Red Seal Indicator Light
complete. You may remove bag from the Vacuum Channel
.
E
7. You now have one sealed end (Fig. 5).
8. Now you are ready to vacuum seal with your new bag (see
next page).
9 US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
V4400_22EFSM1.indd 9-10 V4400_22EFSM1.indd 9-10
®
Bag
and place roll into Roll Holder
H
and place bag material beneath
J
across the Cutter Bar (Fig.
K
. Red Seal Indicator Light
F
until clamp motor starts.
E
5
turns off, sealing is

Fig. 1

Fig. 2
5
will
Fig. 3
Fig. 4
E
Fig. 5
H
J
K
F
5
Insert Bag
Curl Downward