Gima 33676 Manual Del Usuario página 109

% The light between the photoelectric receiving tube and the light-emitting tube of the device
must pass through the subject's arteriole. Make sure the optical path is free from any
optical obstacles like rubberized fabric, to avoid inaccurate results.
% Excessive ambient light may affect the measured results, such as surgical light (especially
xenon light sources), bilirubin lamp, fluorescent lamp, infrared heater and direct sunlight,
etc. In order to prevent interference from ambient light, make sure to place the sensor
properly and cover the sensor with opaque material.
% requent movement (active or passive) of the subject or severe activity can affect the
measured accuracy.
% The SpO2 probe should not be placed on a limb with the blood pressure cuff, arterial
ductus or intraluminal tube.
%
The measured value may be inaccurate during defibrillation and in a short period after
defibrillation, as it has not defibrillation function.
% The device has been calibrated before leaving factory.
% The device is calibrated to display functional oxygen saturation.
% The equipment connected with the Oximeter interface should comply with the
requirements of IEC 60601-1.
% Please select medical power adapter to charge it, when connecting the special adapter with
the socket, make sure there is no shelter near the socket and it is easy to plug and unplug,
6