Gima 33676 Manual Del Usuario página 136

Figure 5.15 Wearing mode of probe
Insert the SpO probe into USB interface, the wearing way is shown in Figure5.15.
2
(1) Connect the probe with the device.
(2) Insert the finger into the probe.
(3) Under the measurement interface, read the related data directly from the LCD.
Attention:
When inserting the finger, the light emitting from the sensor must be directly irradiated to the
side of the fingernail.
5.1.4 Auto poweron function
After setting the time of auto poweron, turn off the device, when it reaches the time set, it will
turn on and record automatically. After "Record Timeslice" time, it will turn off automatically
(refer to 5.1.2).
33