Gima 33676 Manual Del Usuario página 127

Record
5
Length(h)
6 Auto Record?
7 Exit
Attention: "Auto poweron" can not be set during recording.
Attention: when it reaches the set time and under "OFF" state, the device will turn on and record
automatically.
5. Record setting
1) When "Record" is "OFF", select it to enter record setting menu shown as Figure 5.6. The
prompt information "You will start to record! Are you sure?" displays on the interface,
select "Exit" after setting to "Yes" to enter the record interface, under record interface,
record sign is "REC ●", it indicates that it is recording when "●" flickers, recorded time
displays on the interface shown as Figure 5.7. Select "Exit" after setting to "No" to enter
the interface which will not record.
Setting range: 1~10, default: 8, unit: hour
"NO"/"YES", YES: confirm, No: cancel
Select it to return to previous menu, "YES": exit this interface, the
settings take effect.
24