Publicidad
Idiomas disponibles
Idiomas disponibles
LEARNING ACCESSORIES
After you log in the Setup menu, follow the steps below to add/remove accessories
How to add new accessories
• Step 1: Enter the Main Menu and select Accessories.
• Step 2: Choose Remote control to associate remote control devices (remote control
and wireless keypad), choose RFID Tag to associate RFID Tags, choose wireless sensor
to associate sensors (PIR, door/window contact and all associable sensors of the range).
• Step 3: Choose Add new, trigger the accessory during the learning phase lasting 30
seconds. To add the remote control, just press any button; for the magnetic contact just
remove the magnet from the transmitter; for the PIR sensor press the connection button on
the back, and for the RFID Tag bring it closer in the special central unit area.
NOTE: select the operating mode (Normal, Home, Delayed, 24h) you want to assign to the
sensor. More information can be found under "Settings categories".
How to delete accessories
• Step 1: Enter the Main Menu and select Accessories.
• Step 2: Delete one accessory. In the sub-menu Remote Control/RFIDTag/Wireless Sensor
choose Delete one, enter the number that identifies it and press Enter.
• Step 3: Remove all accessories. In the sub-menu Remote/RFID Tag/ wireless sensor type
choose Delete all, press 1 to confirm and delete all remote controls / sensors / tags. Press
0 to cancel the operation.
Setting up categories
Each sensor can be assigned 4 different categories: Normal, Home,
Delayed and 24h mode. The mode will be assigned when pairing the sensor.
• Normal: the sensor will trigger will trigger the alarm when the central unit is armed
Home mode
.
• Home: the sensor will trigger the alarm if the central unit is in Home mode
be paired for example with PIR sensors inside the house, so that when you activate the Home
mode
, you can enter your home without triggering the alarm, providing both perimeter
and outside protection thanks to the presence of the door/window sensors that remain active
because they are not paired with this mode.
• Delayed: You can set sensors delays in relation to alarm system triggering. Recommended
function for example for door/window contacts.
• 24h: Regardless of whether the system is armed or disarmed, the paired sensors will remain
24hrs active. Useful with smoke detection sensors.
or in
. This mode can
GB
11
Publicidad
