Publicidad
Idiomas disponibles
Idiomas disponibles
• Step 2: Choose Control by Phone to set the remote control by phone and confirm with Enter.
• Step 3: Choose ON or OFF to enable/disable the remote control by phone.
Saving phone numbers
• Step 1: Enter into the Main Menu and select Phone Numbers.
• Step 2: Choose Phone to save phone numbers that will receive calls, and the SMS to save
the phone numbers that will receive the text messages.
• Step 3: Enter the numbers and confirm with Enter. To delete, use the button *.
Enabling/Disabling power tamper
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose No Power to set the power tamper control and press Enter.
• Step 3: Select ON or OFF to enable/disable the power tamper control.
Enabling/Disabling lack of GSM signal
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose No GSM to set the lack of GSM signal and confirm with Enter.
• Step 3: choose ON or OFF to enable /disable the lack of GSM signal.
Enabling/Disabling keypad tones
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose Keyboard Tones to set the keyboard and press Enter.
• Step 3: Select ON or OFF to enable/disable the keyboard tones.
Setting Access code
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose Access Code to set the access codes and confirm with Enter.
• Step 3: Choose Code Admin/User Code/Duress Code, enter the new code and confirm
with Enter.
Setting the Ring Count
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose Ring Count to set the number of rings before the Central unit picks up the
incoming call (for Control by Phone) and confirm with Enter.
• Step 3: Enter a value ranging from 1 to 9 and confirm with Enter. NOTE: Default settings for
Ring Count = 3
Setting the Siren
• Step 1: Enter into the Main Menu and select Settings.
• Step 2: Choose Siren settings to set the sirens and press Enter.
• Step 3: Choose Siren Volume, Wired Siren, Built-in Siren or Wireless siren depending on
the accessory to control and confirm with Enter. The siren built in the central unit is called
"Built-in siren."
• Step 4: Select Siren Switch and/or Arm/Disarm Tone, select ON/OFF to enable or disable
the feature and select 0/1 for "Siren Volume".
NOTE: Default settings. Siren- Arm/Disarm Tone = ON.
Siren duration setting
• Step 1: Enter into the Main Menu and select Settings.
14
GB
Publicidad
