Tips And Advice On Installation; Questions About The Product - SOMFY Sonesse 30 DCT Manual De Instrucciones

Sonesse 30 DCT

2.5.Tips and advice on installation

2.5.1.Questions about the product?

Observations
The motorised product is
noisy.
The motorised product
stops too soon or too late.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Possible causes
The wheel and the crown
are not adapted to the used
tube.
The mechanical plays
between drive, accessories,
tube and end of tube are
too high.
The wheel is not properly
fixed to the tube.
The equipment is
constrained between the
brackets.
The length of the notch is
not adapted to the drive
hook or to the used crown.
Debris, screws or other are
in the tube.
The temperature of the
environment is not in
conformity with the
operating temperature.
The end limits of the
motorised product slip.
End-limits are not properly
adjusted.
Solutions
Change the wheel and the
crown.
The mechanical plays
between drive, accessories,
tube and end of tube must
be decreased to the
minimum.
Fix the wheel properly to
the tube.
Decrease the constraint
between the brackets.
Adapt the length of the
notch to the drive hook or
to the used crown.
Empty the tube.
Change the environment
temperature.
Re-set the end limits
referring to Readjusting
the end limits [} 15]
Adjust the end-limit
referring to Readjusting
the end limits [} 15]
EN
13