Compatible Power Supplies (For Us Only); Wiring - SOMFY Sonesse 30 DCT Manual De Instrucciones

Sonesse 30 DCT

2.2.Compatible power supplies (for US only)

For USA and CANADA, use only SOMFY power supply listed in the leaflet. For other
countries, see Compatibility Matrix document for appropriate power supply.
References
1870196
1870192
1870197
1870198
1870259

2.3.Wiring

2.3.1.Wiring of the power cable
WARNING
To ensure electrical safety, this Class III drive must be powered by a "class 2"
power source (SELV -Safety Extra Low Voltage) + LPS (Limited Power Supply).
PRECAUTION
• Cables routed through a metal wall must be protected and insulated by
sleeving or sheathing.
• Secure the cables to prevent any contact with moving parts.
• If the drive is used outdoors and if the power supply cable is of the H05-VVF
type, run the cable in a UV-resistant duct, e.g. trunking.
• The drive cable cannot be removed. If it is damaged, return the drive to the
After-Sales department.
CAUTION
• Leave the drive power supply cable accessible: the product must be easily
replaceable.
• Always make a loop in the power supply cable to prevent water from
entering the drive.
©
Copyright 2022 SOMFY ACTIVITES SA. All rights reserved.
Designations
5 motors / Somfy Control Distribution panel
10 motors / Somfy Control Distribution panel
15 motors / Somfy Control Distribution panel
20 motors / Somfy Control Distribution panel
Somfy Power Panel
EN
9