BE Power Equipment B4014VTBA Manual Del Operador página 12

The following diagrams are intended for general reference.
Your pressure washer may differ from the models shown in the following
pages. For specific model information, please visit bepowerequipment.com
1.
2.
3.
4.
5.
6.
7.
Conn high-pressure hose to the outlet. Connections vary by model.
1.
Muffler/Exhaust - Reduces noise of the engine and expels heat.
2.
Detergent Siphoning Hose - Used to draw detergent into the low-pressure stream.
3.
Spray Nozzles - 0°, 15°, 40° and Detergent: for various cleaning applications.
4.
5. (Above) Choke rod - Prepares a cold engine for starting.
(Down) Throttle Lever - Controls engine RPM speed.
6. Recoil Starter - Used to manually start the engine.
7. Soap Tank: (not included on all models) Fill with pressure washer detergent
only.
8. Pump: develops high pressure. Connect the garden hose to the water pump
inlet and connect the high pressure hose to the outlet. Connections vary by
model.
Muffler / Exhaust: Reduces engine noise and expels heat.
9.
10. Detergent suction hose: used to draw detergent into the low pressure stream.
11. Spray nozzles: 0°, 15°, 40° Detergent: For various cleaning applications.
12
COMPONENT DIAGRAMS
www.bepowerequipment.com
11.
10.
9.
8.