Assembly; Attach Handle - BE Power Equipment B4014VTBA Manual Del Operador

Your pressure washer will require some assembly. If you have any trouble with
this process, please call our tech support department (1-866-850-6662) with your
model number.
Unpack your pressure washer
• Remove all the components, including bags and manuals.
• Inspect components to make sure there is no visible damage.

ATTACH HANDLE

1. Remove any plastic coverings that may be on the handle. Place handle (A)
onto handle supports (B) connected to the frame. Make sure holes (C) in
handle align to the holes on the frame supports.
NOTE: These diagrams are intended for general reference. As a result, they may
not fully reflect the appearance of your product.
2. Insert the bolts through holes. The carriage bolts will have hex heads that
need to be matched to the side of the handles with a hex shaped hole pattern
to help secure them.
3. Insert colored quick connect spray nozzles, high-pressure hose, gun wand
assembly into the spaces provided.
4. If needed, attach the provided detergent siphoning hose to brass barb coming
out of the pump near the high-pressure outlet. (Do not attach to the black
plastic thermal relief valve barb.)
18
A
C
B
www.bepowerequipment.com

ASSEMBLY