BE Power Equipment B4014VTBA Manual Del Operador página 13

COMPONENT DIAGRAMS
8.
9.
10.
11.
12.
13.
Spray Gun - Controls the application of water onto the cleaning surface with a trigger
1.
device. Includes trigger lock. Allows you to switch between various spray nozzles.
Spray Nozzles - 0°, 15°, 40° and Detergent: for various high-pressure cleaning
2.
applications.
High-Pressure Hose - Designed to withstand the pressure generated by the pump.
3.
Unloader - Pressure is preset at the factory.
4.
Pump - Develops high pressure. Connect the garden hose to the inlet of the water
5.
pump, and connect the high-pressure hose to the outlet.
Oil Level Indicator - Level should be at halfway (not included for all models).
6.
Detergent Siphoning Hose - Use to siphon pressure washer-safe detergent into the
7.
low-pressure stream.
Fuel Tank - Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
8.
Air Filter - Protects engine by filtering dust and debris out of the intake air.
9.
10. Throttle Lever - Controls RPM speed of engine.
11. (Top) Choke Lever - Prepares a cold engine for starting.
(Bottom) Fuel Valve - Used to turn fuel supply on and off to the engine.
12. Recoil Starter - Used for starting the engine manually.
13. Engine Switch - Set switch to "On" for recoil starting. Set switch to "Off" to stop a
running engine.
www.bepowerequipment.com
7.
4.
5.
6.
1.
2.
3.
13