Assembly - Hart HPSP25 Manual Del Operador

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
Wet Conditions Alert
Long Hair
Recycle Symbol
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
This is a "household type" product which means it is intended for household use.

ASSEMBLY

UNPACKING
This product requires assembly.
 Fully assemble product prior to use.
 Carefully remove the product and any accessories
from the box. All items listed in the Includes section
must be included at the time of purchase.
WARNING:
Items in the Assembly section are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
 If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
DESIGNATION/EXPLANATION
Do not expose to rain or use in damp locations.
Risk of long hair being drawn into air inlet.
This product uses lithium-ion (Li-ion) batteries. Local, state or federal
laws may prohibit disposal of batteries in ordinary trash. Consult your
local waste authority for information r egarding available recycling and/or
disposal options.
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the product when assembling parts.
ASSEMBLING THE SPOT CLEANER
See Figures 1 - 4, page 9.
 Remove the battery pack.
 Align the raised tab on the end of the hose with the
latch on the pet tool and press together until the
latch snaps into place.
 Slide hose clips into the grooves on the bottom of
the spot cleaner. Press firmly until fully seated.
 Wrap the hose around the spot cleaner.
 Place the hose inside the clips at the bottom of the
spot cleaner and place the pet tool inside the clip
on the back of the spot cleaner.
5 – English